Everything is good except for the cable, which was USB 2, resulting in the hard drive not working at more than 30mb/sec. Luckily, I had another USB 3 cable and it worked correctly afterwards.

As for the construction quality, it is okay, but I had a little difficulty with the installation because the disc does not fit well on the rubber around the case, resulting in it not closing properly.
On the positive side, it is very convenient for the cable that attaches on top of the rubber around the body, and it has a very nice design

It's worth its money.
A disc that had a problem in another case, seems to work fine in this one

Beautiful SSD hard drive enclosure, with side-mounted elastic material for protection against falls. I put a Kingston SSD 480GB inside and it works flawlessly on the Xbox Series S.

The installation is relatively simple: you remove the connection card from the enclosure, attach it to the SSD, then remove the elastic protective cover and insert the attached SSD.

Finally, you place the white plastics on top and bottom and screw in the 4 small screws (if you manage to) that are included in the package with a small Phillips screwdriver. The screws were really the worst part of the whole process - I struggled to get them in.

Other than that, a very good product

Note that it is for 2.5" drives, with a thickness of 7mm. If you install a 9.5mm drive, it will not fit properly.
As shown in the pictures, the design for the USB cable is practical. However, the installation of the drive is a bit more complicated than with other cases, as you have to connect the SATA ports separately, then the shockproof casing, and finally the plastic covers with screws (a small screwdriver is not included in the packaging). It has a LED indicator during operation.
For 12-13 euros, I think it's okay (price as of 13/08/2018).