After a lot of searching, I ended up with this printer.
In the end, internet comments should not be taken too seriously.
After 200 photos, the MAGENTA ink is already halfway gone. So the claim of printing around 1500 photos is not valid unless you print photos with fax resolution.
After failing to meet its most basic element, I don't have much else to say about it.
Average to good build quality, good service from EPSON, slower than a turtle in high-resolution photo printing, average colors and acceptable resolution for photos.
I will come back to see when all the inks will need to be replaced.

update. When the printer first arrived, I didn't mention that it took at least 20 head cleanings to print. I thought it might have been the first time and because it's old, it was understandable.
Now, after 640 photo prints, it started making lines on the photos. I print a nozzle check, of course it's imperfect. Clean the head again, check again, etc... 5-6 times the same thing, minimal improvement... Out of the 640 photos, at least 50 so far have issues. I'm tired, calling the service on Monday to see what will happen.
Also, the Ink levels are all over the place. On my computer, it shows magenta at 5% while in reality it's at 25%.

update. The problem with lines and colors not printing always appears if it stays inactive for a while. After dozens of head cleanings, it has improved so far. I continue to print photos endlessly, I have refilled the inks 4-5 times. Luckily, it hasn't given me any other problems.

I have had it for 1 and a half months.
The printer is mainly for photos. It gives very good results and has excellent color mixing (due to the 6 colors it uses) and its inks are AMAZING. That's what I wanted. After a lot of searching on foreign websites, Greece, YouTube, etc., I ended up with this one for the reasons mentioned above.
It is relatively fast depending on the resolution you choose. I choose normal quality (because I need it for home use) and it is more than enough. It takes less than half a minute for a 4x6 photo in normal quality. If you choose high quality, it really gives crystal clear images but the speed increases to over a minute. For an A4 size, think about double the time or maybe even more. In general, it is very fast for what it delivers. After all, if you want professional work, like a 4x6 photo in 5 seconds, you go for the professional printers whose prices exceed 1000 euros.
The ink bottles are easy to install, just be careful not to accidentally put a different color in the wrong slot. The printer and the inks that you will use are very informative.
The paper goes in from the back and it closes with a plastic cover (not airtight but good enough) to prevent dust from entering.
Easy menu on the LCD screen.
USB and card reader ports.
It is heavy but elegant and not huge.
Its plastic parts are not cheap or luxurious, they are in a satisfactory condition that leaves you satisfied.
The lack of WiFi is a negative for me.
The Epson program for photos on the computer is very simple, convenient, and fast.
So far, I have printed around 300 4x6 photos with medium resolution and the initial inks are still at around 90%.
I bought it for 420 euros during a time when Epson had a 50 euro cash back offer.

Update 17/11/19:
It's time to change the inks as I have reached 1000 photos with the initial inks.
I bought the 6 original inks for a total of 50 euros.

Update 04/04/20:
I will provide more specific information about the ink replacement and the number of photos I have printed so far, as I have been keeping track of everything in an Excel file since day one.

1. When I bought it on 17/11/19 and updated the inks, of course, I didn't change all of them. I only refilled the Light Cyan, which currently has a level of over 40%, except for the yellow which needs to be changed soon.

2. The photos I have printed so far:
A4 Basic Resolution: (300) High Resolution: (39)
A6 Basic Resolution: (289) High Resolution: (475)
As for regular document printing, no, I don't keep track of those, but it's approximately 15 per week.

Update 28/10/21:

I won't provide detailed updates anymore because I obviously don't keep track anymore. The only thing I have to say is that I still print beautiful photos, but I have increased the number of times I clean the printhead through the program (if I leave it without printing for a while).
No issues, and the inks still last a long time. I have only changed them three times since the purchase.

PS. When I give a photo as a gift to friends and family, they always say, "Wow, what a great photo! Where did you get it printed at a photo studio?"
I'm not exaggerating, it produces amazing photos, especially if they have good resolution