72,81Lei
Express deliveryTuesday, 10 Septemberif you order it in the next 16 hours and 49 minutes
+11,99 Leishipping cost - sent from Greece
Selected Store
Stock 6 pieces
Skroutz Buyers Protection
Creality3D ABS 3D Printer Filament 1.75mm Blue 1kgCode: 31544657
Buy together
Similar products
All shops
Prices are calculated for:Romania, Other Payment Options
- Official reseller
ABS 3D Printer Filament 1.75mm Blue 1kg (3301020011)
Store products - Official reseller
ABS 3D Printer Filament 1.75mm Blue 1kg (3301020011)
Store information76,29 Lei - 72,81 Lei
- Official reseller
ABS 3D Printer Filament 1.75mm Blue 1kg (3301020011)
Store products - Official reseller74,50 Lei
- Official reseller
ABS 3D Printer Filament 1.75mm Blue 1kg (3301020011)
Store products
Description
- Material: Acrylonitrile butadiene styrene (ABS)
- Filament Diameter: 1.75mm
- Printing Temperature: 220-260 °C
- Tensile Strength: 43MPa
- Spool Outer Diameter: 20cm
- Spool Inner Diameter: 5.5cm
- Spool Height: 6.5cm
Manufacturer
Creality3DSpecifications
- Product Number
- 3301020011
- Material
- ABS
- Colour
- Blue
- Diameter
- 1.75 mm
- Weight
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Reviews
Reviews photos
Reviews by our members
- This review is about the colour: Black
Perfect and durable it became!! I'm talking about the Stand that holds the ground coffee
Translated from Greek ·Did you find this review helpful? - This review is about the colour: White
With a huge difference the worst thing I have ever bought. You cannot print with this useless thing. As soon as I got it, I threw it away. 1 kilo in the trash
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
So far, in the few prints I have made, it has seemed quite good and at a good price for the purchase. But I do not have high demands since I am a beginner.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
I have printed about 10 kilograms of this specific ABS in various colors and it is excellent. The only problem I have seen on a permanent basis is that many times it has absorbed moisture and needs to be dried in an 80-degree oven for 8 hours to ensure it doesn't break easily. This, along with the odor it emits during printing, requires ventilation, especially when in a living space.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
Taking into consideration its price, it is extremely honest. It is generally a good filament, with good prints if you have a well-calibrated machine (and enclosure for ABS). It has similar properties to 20€/kg ABS filaments, although it recommends slightly lower temperatures than typical ABS, which is not very accurate in the end, a common practice by Creality and other filaments and materials. Without further ado, it is worth its money and is a good solution for large pieces that would be expensive. This review only applies to the black filament. The gray one had issues, with the color not being uniform and very slight differences in the print, so I would stick to the black one. I also got a red one, which was equally good as the black one, no complaints.
Update: After printing approximately 10 kilograms with this material, I can finally say that it may not be worth it. I noticed, compared to PLA at least, that it required much more frequent printer maintenance, as it produces a lot of fumes and also caused problems with some bearings that started to make noise. It remains very economical, but I believe it is better to spend a little more and buy a filament that will not create problems for your machine, either a different material or a different brand. I have not tried any other ABS filament extensively enough to have an opinion on the matter.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: White
Ender 3 Pro with enclosure and Sunlu drybox
240c/110c 80mm speed
Dragon hotend
Despite its cheap price, it prints just fine, but it smells quite a lot that I can't sleep because of the odor!Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
Very good even though I am not experienced, first time printing with ABS. Ender 3 (with full metal hot end).
I made a simple box out of melamine and put the printer inside.Bed 100°C
Printing temperature 245°C
Enable Print cooling = Unchecked (in Cura), meaning no airflow.
Plain glass on the bed (of course I removed the magnetic flexible cover), with hairspray.
Temperature inside the box ranged from 33°C to 40°C.And it printed fine!
Update: now I am printing on the magnetic flexible surface that comes with the Ender 3, it turns out it is THE BEST even for ABS! And from what I read here: https://www.reddit.com/r/ender3/comments/c1ofeg/ender_3_magnetic_bed_myth/
, it doesn't suffer from the high temperature! We'll see.Translated from Greek ·Did you find this review helpful? Very good ABS filament, I use it with the BambuLab X1-Carbon and it prints very easily at 270C with a bed temperature of 95C and a speed of 300mm/s.
Positive that it doesn't smell like other ABS filaments, but I still ventilate the area afterwards.
Excellent strength and ideal for printing functional objects (I use it for drone parts and 3D printers), where high strength is needed with minimal weight.Translated from Greek ·Did you find this review helpful?- This review is about the colour: Black
I have been professionally printing exclusively with ABS for 3 years now and I have tried printing materials from various companies. I tried this specific one from Creality for the first time because I was tempted by the cheap price and also because it is a product from a well-known company in the 3D printing industry. I was very satisfied with the print quality, there was no warping or layer separation, which are common problems when printing ABS with an open printer. Nozzle: 0.6mm @245°C, bed: 100°C, speed: ~50mm/sec
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Red
I have been professionally printing exclusively with ABS for 3 years now and have tried printing materials from various companies. I tried this specific one from Creality for the first time because I was tempted by the cheap price and because it is a product from a well-known company in the 3D printing industry. I was very satisfied with the print quality, as it had no warping or layer separation, which are common issues when printing ABS with an open printer. Nozzle: 0.6mm @245°C, bed: 100°C, speed: ~50mm/sec
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
Very good and durable material. Perfect print quality. I used it for making gears and various small components due to its strength.
Bed temperature 85
Hot end temperature 255
With 8% airflow
Creality ender3 proTranslated from Greek ·Did you find this review helpful? Verified purchase
This review is about the colour: BlackIt's worth its money, I will choose it again
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: WhiteVery good but it needs a stick otherwise nothing sticks to the bed.
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: BlackVery good and at a relatively low temperature
Translated from Greek ·Did you find this review helpful?Verified purchase
Everything is good...!!!!!!!!!!!!!
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: RedVery good material and very good price
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: Red
Technology
Home & Garden
Fashion
Sports & Outdoors
Health - Beauty
Baby & Kid
Auto - Moto
Business - B2B
Books
