Set the delivery location to see products according to your choice.
Filament PLA+ for 3D printer from GST3D in yellow color.
Sold by
Stock 11 pieces
Skroutz Buyers Protection
3D Printer Filament
Prices are calculated for:Romania, Other Payment Options
Filament PLA+ for 3D printer from GST3D in yellow color.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
I bought 3, one green and 2 yellow, the green one is good with +5 in temp.
The first yellow one tore in clogs, I didn't dare to button the second one yet.
So far, I have used several spools of different colors. Black, silver gold, red, aquamarine, pink panther.
With a cost of around 14 for occasional use with some more unique colors and when print quality is not a priority, it's okay.
Otherwise, you get what you pay for.
The filament diameter does not have any particular accuracy, in random points where I measured it, I have seen from 1.71 to 1.79mm regardless of the spool and color. Also, even though I dried it for 8-12 hours and there was no trace of moisture, it would easily break in some areas and fold without breaking in others.
Due to the above, the layer lines will always be visible and irregular on the external walls and flat surfaces due to over and under extrusion, it cannot be corrected.
Otherwise, it prints overhangs very well and the winding on the spool is correct.
I mainly use it to print toys and figures for children, so the above does not affect it except for the occasional clogging.
It has some difficulty with supports that are relatively difficult to remove, maybe it requires some tweaking with the support settings.
Once, the nozzle got clogged by the filament itself without finding any foreign object, it has not happened to me with higher quality filaments.
I did not encounter any issues with the filament and the spool was nicely wrapped. I printed it at 215/60 bed temperature on an Ender 3 V3 KE with a simple PLA profile. If I encounter anything strange in the future, I will write about it.
It is a very good and commendable filament. Overall, GST3D is one of the good companies in 3D Printing
I give it 3 stars because as a material it is good... when, of course, it doesn't have pebbles inside that can render the nozzle useless.
After so many years of having 3D printers, I can say that this is the most value-for-money PLA compared to any other I have tried. I have bought many PLAs from abroad for testing, and this specific one, which I got for €15, produces excellent results. The comments about it not sticking are not true; if you properly adjust your printer and use spray to make it stick to your bed, it prints perfectly. For me, it worked perfectly on a glass bed with temperatures of 200/50, and I believe these are the best temperatures for this material. The spools did not come perfectly wrapped, but the comment about them being tangled is not accurate. The way the spool is made prevents it from getting tangled, so some mistake must have been made during placement. Lastly, it is PLA+ and not just regular PLA, so it is natural for the supports to be harder and more brittle. Personally, I prefer the mechanical properties of PLA+.
Honestly, for the price of €15, I highly recommend it without needing to search from abroad or elsewhere. There are other equally good options available for €18-19.
I am new to the hobby of 3D printing and these filaments made me hate it and put my printer up for sale...
I don't know if it's noticeable in the photos, but even two identical blue filaments have different colors. Yes, one is half black, half blue.
The Ender 3 V2 printer... If I don't set the bed temperature to 70 degrees and the nozzle to 215, it NEVER sticks to the bed. On the contrary, the Creality or Real filaments I tried are amazing. Actually, normal.
I had ordered almost all the basic colors and whatever I was lucky enough not to open, I returned without a second thought.
Another thing that impressed me is that all the packages, although they were once in a vacuum, had eventually taken in air.
Relatively good but the supports are very hard and difficult to remove, this happens because they are ABS+ and not plain ABS. Overall, it is good for its price and I would buy it again if I wanted to create something hard and sturdy.
In black, which I tried, it is problematic with the supports that come off very difficultly and break/shatter as if they were glass.
Very nice filament. It produces a relative transparency, but do not have high expectations from FDM printers for such a finish.
It is equally good (if not better) compared to the filament from 'Real Filament' company that I have used. I have the Creality3D Ender-3 v2 and with GST3D products, because they are PLA+, I need to increase the temperature to 215C in order to achieve excellent results.
I have used the black, white, and blue with very good results in all of them
It has very good results and material quality, only it was not well wrapped on the reel, resulting in not being able to pull it and ruining my print. If it was well wrapped, I would give it 5 stars
Verified purchase
For the cost it is excellent (13.90). The supports are difficult to remove maybe because they are PLA+
Flawless.. especially for the price!! It has nothing to envy!!
Verified purchase
Hard wire, gave me quite a hard time with the supports
Verified purchase
It does the job just fine
Verified purchase
It does the job just fine
Verified purchase
It does the job just fine
Verified purchase
Very good......!!!!!!
Verified purchase
All good...!!!!!!!!!!!!!
Verified purchase
All good...!!!!!!!!!!!!!
Verified purchase
Excellent product. Very satisfied with the prints that were used
Verified purchase
No problem with the material. It was exactly what I expected
Verified purchase
Without problems in printing
Verified purchase
Verified purchase
