The MSI MAG Forge 100M case can support up to an ATX motherboard, has a 4 mm tempered glass side panel, RGB fan up to 140 mm, dedicated cooling space, and front USB 3.2 Gen 1 Type A.
The MSI MAG Forge 100M case can support up to an ATX motherboard, has a 4 mm tempered glass side panel, RGB fan up to 140 mm, dedicated cooling space, and front USB 3.2 Gen 1 Type A.
The MSI MAG Forge 100M case can support up to an ATX motherboard, has a 4 mm tempered glass side panel, RGB fan up to 140 mm, dedicated cooling space, and front USB 3.2 Gen 1 Type A.
Airflow
Two 120 mm fans aligned vertically at the front to draw air evenly across the entire surface of the enclosure. This will contribute to positive air pressure within the case, with the rising hot air always being exhausted with the airflow behind and above the MAG Forge 100 series.
Supports ATX / Micro ATX / Mini-ITX
Designed with multiple easy installation mechanisms and accommodates a motherboard up to ATX to provide an unobstructed building experience.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can
report it here.
Very good case for its money. I struggled a bit with the placement of my SSDs, but I found the solution. Also, it is very high-quality construction. Definitely worth it!
The image here is that the same and the number of fans.
The box instead of being purple is Cyan and it doesn't have top fans, it only has the two front ones and the one at the back. Apart from the fact that they need to change the images here, it is a good case and a piece of advice, always look at the description
Really perfect, its purchase is a fantastic case and very beautiful with a lot of space in the front. I have put 3 Arctic coolers and one in the back. I added the two MSI factory ones on top and it has tied together a wonderfully quiet case. Really guys, don't be afraid of it, I repeat, it's worth every euro and it will not disappoint you in any case. Experiment a little with the case and give it some time and you will have a perfect result..!
It is a very good quality case. Good airflow (3X120mm fans or 2X140mm fans in the front and one exhaust) and plenty of space for cable management at the back. Dust filters everywhere and nice lighting from the fans. It is a fairly value-for-money case.
It was purchased at the price of €62. It is a good quality and design box. Good airflow with satisfactory cable management at the back. Dust filters everywhere and nice lighting from the fans. Overall, good especially for its price.
The only negative thing I found is that the threads are not well made and you have to "break" the covers to install a graphics card.
The purchase was made at 50€. It is the first computer composition I am doing, however, I think it was a very good choice for the case.
The LED controller that came with the case made things much easier. Two out of the three fans that the case has are also RGB, you directly connect their RGB cables to the controller (which supports up to 6 different cables, meaning you can practically connect any other fan or device that has RGB), connect the controller to the motherboard, and you're all set.
The protective glass on the front side of the case is quite high-quality, something I didn't expect at this price, just like the rest of the build quality.
It has 2 dust filters, one on the top in case someone installs fans or liquid cooling, and one below the PSU.
Overall, the airflow is flawless, and it has space for an extra fan.
The only thing that could possibly be better is its length, as with the use of an ATX motherboard and liquid cooling, you might struggle a bit to connect the CPU cable (a little). The case didn't have enough space to pass the cable through the top-left side (which means that if you choose this solution, the cable will be right in front of the fan), so I passed it through the gap in the middle and above, and the cable takes up a bit of space from the liquid cooling fans.
**Also, it DOES NOT have an audio jack for a headset, but separate ones for headphones and microphone. Those of you who have a headset will need a splitter (3€) for both the headphones and the microphone to work.
Very good for its price and good quality. The front space is comfortable and can fit whatever you want, with very good air flow! The only problem is at the back in the keyboard management, but with a little patience, you can fix it!