Do not use at temperatures below +10°C

The surface must be dry, clean, free of dust and grease, and fit properly. Slightly roughen metals to achieve a stronger bond.

• Apply the glue in a thin layer on one side (avoid direct exposure to sunlight)
• Press both parts firmly and steadily for 10-20 seconds and place the object in direct sunlight
• Do not move the glued object until the required bonding time is complete
• Bison Glass works under the influence of light (UV rays). Bonding is achieved only in direct sunlight
• If possible, use a UV lamp with a wavelength between 250nm to 350nm

Bison Glass cures under the influence of ultraviolet light, i.e., externally, under sunlight or internally at a window. Bison Glass does not cure under a cloudy sky or artificial light. The use of an ultraviolet lamp with a wavelength between 250 and 350 nm allows directing the light to adhesive joints, thus enabling them to harden.

Remove stains with acetone. Dry glue residues can only be removed mechanically.

Store in a dry, cool place where there is no chance of ice formation.