Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can
report it here.
I did not have time to make a 200 sqm plot, I pull the rope and it cuts, I pass the dealership - company and they say it is not covered. Unacceptable warranty, they say not even a month. In the end, everything is useless, they are all Chinese-made
I will speak from my little experience and I will come back with an update. I have only used it once for half an hour. The motor is very powerful, at least for my expectations.
The materials seem good EXCEPT for the shoulder strap, which is the cheapest on the market and the clip (photo) broke on the first try I did without connecting it to the machine and I am in the process of getting it replaced by the company through the seller.
I got very tired of the instructions, which are unclear and indistinct (photo), of course, below the manual has instructions that refer you to the depicted photos.
The white nylon thread that is inside (photo of the machine) is of poor quality and you will need to get a better one. I think it needs a 30-size because the larger ones strain the machine.
It also has a fuel and oil mixing bottle (photo), in case you can't find the special blend mentioned in the manual.
The guard does protect, but if you try to cut dense grass, it accumulates between the head and the guard and you need to remove them because it gets clogged (photo of the head with replaced nylon thread).
Protective glasses, long-sleeved shirt, work overalls or jeans, and if not, definitely boots! Little pieces fly everywhere!
Every week something breaks. You raise your hands up. Yes, it is cheap but it cuts your hands. You can't get any work done. It is probably for very limited use like cleaning your yard. It doesn't hold up in the field.
Amateur use 1-2 times a year. Powerful tool. I do not have knowledge of many grass trimmers. However, very satisfied after 2 times. Use only with trimmer line. I have no opinion on the blade.
For me, it's pretty good and worth its money.
The correct ratio is 5 liters of gasoline to 100 ml of oil (if you use Stihl oil, the third category, for both winter and summer, the ratio should be the same). This ensures proper and excellent engine lubrication.
When you purchase it, work it at idle with a little gas every 5 minutes for about 40 minutes to break in the engine
I have had it for 2 months now and I am very satisfied.
I bought it for amateur use, so I work with it for a maximum of one or two hours.
I have used it for about 20 hours, both with a trimmer line and a blade.
It is indeed very powerful.
However, it is also heavy. Nevertheless, in the one or two hours that I use it, it does not tire me out, although the harness they provide with it is terrible and not comfortable at all.
Also, the parts are very easy to replace for now, and the only problem it gave me yesterday was that the gas throttle lever was loose and needed tightening.
I believe it is worth its price and more.
I believe that even if it breaks at the end of the summer, I will buy the same one next year.
I cut the blade through thick bushes, 2 meters tall, and it works fine.
I have also cut thick stems of wild plants, about three centimeters thick, with the blade.
I will share my experience again after several uses. It is flawless and the only negative thing I will mention is the gasoline consumption, which is about one acre of weeds per tank. However, it is very powerful and that doesn't bother me. After all, I use it for personal use
Well, after a year and a half and literally after 7 cuts, the piston broke and I gave it for scrap. Meanwhile, because it was economical, I took great care of it, with the proper oil ratio and resting every half hour of work. It was also quite heavy and powerful, but it didn't suit me in terms of grip. The construction materials were not good at all, as the protective cover broke from the first uses, as well as the base of the tank. I purely used it as an amateur for cutting grass in the yard of my country house. I didn't even bother with the 2-year warranty, as I knew beforehand the well-known answer about the fuel-oil ratio.
After an hour it stopped working...
I sent it to the service and they told me it got stuck...
After many, they told me that the oil ratio was wrong (so the gas station attendant who mixed it for me, and for hundreds of others,
has no idea....)
Then the service suggested that I give it to them and with another 100 euros they would give me
another one made in P.R.C.
Of course, I didn't accept and I asked them to send it
back to me.
But they didn't send it to me. After a while and several disturbances, I had to call the dealership
and intervene to get it, even if it was broken, back...
I bought it last year, it has worked for 10 hours and it burns a lot compared to efco and oleo mac that I have worked with respectively. Anyone who wants it for professional use should forget about it. At 50 hours of operation, it will have paid off compared to something more expensive but with cheaper consumption. It has tremendous vibrations and does not work properly at low speeds. The quality of the materials used is poor.
Kids, we have and we say:
1) + powerful engine
2) + large fuel tank
3) + value for money ratio
4) - poor quality plastic materials of mediocre quality
5) assembly instructions are tragic
3) sensitive fuel tanks break with the slightest touch
Overall, you get what you pay for. Honest for its price.. strictly for amateur use
I bought it 10 days ago and used it once on an 800sqm rural plot for cutting grass that was one meter tall. It took me about 2 hours, filled it 2.5 times with a total of 4 liters of gasoline, and I didn't encounter any problems. After reading some comments, I was tempted to check the screws for proper tightening before the first use. In the end, it was necessary to do so. It is quite good for amateur use and for its price. I highly recommend it.
I bought it a month ago. To cut cotton and colorize my olives. The first day, the plastic protective on the base of the axis broke. The second day, the base supporting the reservoir came off, meaning it was cut. On the fourth day, 4 screws came off from the carburetor and the filter support. I took it for service. I got it back for work and after 2 days, the tool ended up with a damaged piston. Replacement cost is 100€. Huge disappointment. In the end, in life it is proven that cheapness eats away at quality. Stay away...
I am very satisfied, it is very powerful, it is worth more than its money. On the negative side, the quality of the plastics and the noise it makes, but for this money, it's okay
I bought the tool and immediately used it in the field for cutting grass. The positive conclusions are:
1) relatively lightweight
2) starts easily and quickly
3) it is quite powerful... with a 4.3 engine, it destroys everything and doesn't hesitate.
4) it is pleasant to work with using the support belt.
Negatives:
1) it does consume quite a bit of gasoline
2) it seems that its materials are not of good quality
3) it cut the protective base of the gasoline tank after just 2 hours of work. (fortunately, they will repair it for me)
In conclusion, for its price and for amateur use at home and in the field, it is worth it. Fortunately, the place where I bought it provides service and spare parts.
If there were no comments, I would hesitate, but in the end, I did very well and bought it. The tool literally tears apart. I liked the attachment that comes off with a pull. I don't know what some people expect for this money, but for something of the same cubic capacity from a brand, it has a price that is five times higher and above. I will see how it will perform over time, but for now, it has done the job in just one hour on half an acre of land, destroying everything that was there. It immediately takes something that even the new Husqvarna didn't do for me. I used a carbon fiber trimmer line and even ate through the cement in corners. If it continues like this for another two years, for example, it will have made its money worth it. There is the concept of "you get what you pay for," but this is value for money and more. Very satisfied, and I will come back to write after several uses.
Received today. Relatively easy assembly even for a beginner like me. The plastic parts on the handlebar and the connection of the handle remind you that the money you paid is not much and you shouldn't expect anything more. The rides of the one hole on the base where the pole with the motor screws stayed on the Allen wrench. Luckily, it had a longer one in the bag and we used that one and it worked.
The head was replaced with another one. The motor starts on the first try. A fuel tank worked for about 1 hour cutting wild grass and various thick-stemmed weeds. Have some extra money for accessories because the one it comes with is not good. The first impression is very positive for the use I want it for, and we'll see its durability over time.
At the price of 139 euros that it reached my door, I don't think I could ask for more. I will come back in a while.
Update: The machine, except for the plastic parts, is possibly the best one available in this price range and category for amateur use. It always starts on the first try and works flawlessly. Highly recommended.
At the price of 107.50 euros today, 23/11/20, I am tempted to get another one.
About a year later, the machine works just like the first time. It starts on the first try and has never let me down.
Certainly not for professionals, as it consumes more fuel than a branded one would. However, for amateurs who use it occasionally, it fits perfectly.
It consumes about 2.5 liters of fuel per acre without any issues. It truly mows.
Update: 3 years later, I have replaced the pole, angle gear, cord, and electronics. It has cut everything you can imagine. Cost: 140€ including labor. I have pushed this machine to its limits. Its motor is truly one of the best I have worked with. I have decided to get another one. After 3 years, it still starts on the first try. That says it all about its value for money
Well, as a machine it is very powerful and for this money... yes, it is worth its money, be careful with the fuel and oil ratio because the dealership says three percent while the manual says four percent!!!!
It is a machine that someone can use to do agricultural work at home and more. Now, of course, I don't know how reliable it is for someone to buy it and go out to earn a living, meaning to work with it all day. Overall, I am very satisfied because it is a very good economical and reliable choice for its price, and anyone will be able to clean their fields and garden from weeds and more.
Very powerful motor that normally costs 500 euros from well-known brands!! However, this is the only positive thing. Everything else is negative, such as the fact that it caused damage to the gearbox after 3 applications on a 400 sqm plot. It has hardly worked at all. The manual is non-existent, and it consumes a lot of fuel! Overall, the quality of the materials is below average. Someone who is looking for something powerful and economical, this is what they are looking for, but for me, it did not prove to be reliable (maybe I was unlucky).
It is a machine that is always characterized as a successful purchase in relation to its price, as branded ones cost four times its price.
Among its strengths, the engine is very powerful, with plenty of horsepower, works effortlessly with a 4.5mm string, and you can accelerate without needing to fill up the motor.
It sounds like a big chainsaw.
Now let's move on to the negatives, before I mention the truly Chinese quality of the materials, I will say that it consumes gasoline excessively.
I did not expect such consumption, it drinks up a 4-liter tank in no time.
Furthermore, as I mentioned, the plastic parts and especially the steering wheel are of very low quality and durability.
In the end, the machine is definitely worth its money because it provides a cheap solution.
As a motor, it literally doesn't hesitate, just take care of the other parts and it will do the job for you.
Guys, the machine is a beast, it's amazing. I bought it yesterday, May 5th, 2020, and today I used it to clean a 1.5-acre field, and it cleaned it easily, even though the grass was over 2m tall. Of course, it's still too early to say if there will be any potential issues, I don't know what will come up.
I bought it about two months ago, a friend who had it recommended it to me and was very satisfied. I cleaned a plot of land that I have, about 1 and a half acres full of weeds. It didn't tire me at all, it started easily, its weight was very good, and no problems at all. I highly recommend it.
Everything I have bought from Nakagama has turned out to be very good. With the carbide disc it comes with, I can even cut logs up to 10 centimeters thick. The belt is very good. It adjusts very easily and is lightweight. I recommend it.
I have been very satisfied with the previous model, the PB6200, which I have been using professionally for 4 years until now. In early March 2020, I purchased this new model that has just arrived. I haven't used it much yet to have a complete opinion, but the motor sounds much more powerful and in terms of construction, it has nothing to envy from the much more expensive and branded ones. Better to have three of these than another one!